3-3 Adjusting the Paper Near-End Detector The paper near-end detector senses when the paper is nearing its end and turns on the PAPER LED. The paper near-end detector can be adjusted according the thickness of the paper core. I The paper near-end detector n Adjusting the paper near-end detector Roll paper differs in paper core size, so you may need to adjust the paper near- end detector. Њ Make sure the paper core inside diameter (Шd) is 10.5 to 12.5 mm. Ќ Measure the paper core thickness A (Refer to Figure below) for the roll paper to be used. Ћ Determine the corresponding adjustment value from the table below. Table 3-1.
Paper Core Thickness and its Graduation Degrees Dimension A Adjustment value 4.5 mm I # 1 \ A . 17