Projector Control Sample Contents Windows 10 Command Prompt Prerequisites and Preparations Prerequisites In the following example, change "192.168.88.1" to the IP address or host name of the projector you want to use. Check the IP address in the projector’s [Network] menu. Preparing the Projector Open the command prompt.
(Open the start menu, type "cmd", and then press Enter.) When API authentication is Off curl http://192.168.88.1/api/v01/control/escvp21?cmd={cmd}+{param1}[+{param2}] curl --digest --user EPSONWEB:{password} http://192.168.88.1/api/v01/control/escvp21?cmd={cmd}+{param1}[+{param2}] When API authentication is On For {password} ,specify the Web Control Password set in the [Network] menu. For the {cmd}, {param1} and {param2} sections, specify ESC/VP21 commands. Connect multiple parameters by using "+" When secure HTTP is enabled, you can also specify the following.
curl -k https://192.168.88.1/api/v01/control/escvp21?{cmd}+{param1}[+{param2}] curl -k --digest --user EPSONWEB:{password} https://192.168.88.1/api/v01/control/escvp21?cmd={cmd}+{param1}[+{param2}] If you have installed a trusted certificate on the projector, you do not need to use the -k option. If your company network uses proxy settings, you need to enter --noproxy 192.168.88.1 to communicate directly. Control Power On/Off curl http://192.168.88.1/api/v01/control/escvp21?cmd=PWR?
(Check the current power status) curl http://192.168.88.1/api/v01/control/escvp21?cmd=PWR+ON curl http://192.168.88.1/api/v01/control/escvp21?cmd=PWR+OFF Switch Sources curl http://192.168.88.1/api/v01/control/escvp21?cmd=SOURCE+30 (HDMI source) curl http://192.168.88.1/api/v01/control/escvp21?cmd=SOURCE+80 (HDBaseT source) For the source number, see the ESC/VP21 command list in the "Specifications" for the model you are using.
A/V Mute Function curl http://192.168.88.1/api/v01/control/escvp21?cmd=MUTE+ON curl http://192.168.88.1/api/v01/control/escvp21?cmd=MUTE+OFF On-Screen Display Settings curl http://192.168.88.1/api/v01/control/escvp21?cmd=ONSCREEN+00 (Do not display any menus or messages) curl http://192.168.88.1/api/v01/control/escvp21?cmd=ONSCREEN+01 (Display menus and messages as normal) © 2024 Seiko Epson Corporation Page 10/42