EPSON — Content Playback Sample, стр. 7

Content Playback Sample Contents Windows 10 Command Prompt Prerequisites and Preparations Prerequisites In the following example, change "192.168.88.1" to the IP address or host name of the projector you want to use. Check the IP address in the projector’s [Network] menu. In the following example, you can change the "http://" section to "https://" if secure HTTP is enabled. Preparing the Projector Open the command prompt.(Open the start menu, type "cmd", and then press Enter.) If your company network uses proxy settings, you need to enter --noproxy 192.168.88.1 to communicate directly. Execute Playlist ID:

Play 1 (V01) curl http://192.168.88.1/api/v01/contentmgr/playlist/play/1 Stop playlist (V01) curl "http://192.168.88.1/api/v01/contentmgr/playlist/stop" Playlist ID: Play 1 (V02) "http://192.168.88.1/api/v02/contentmgr/playlists/playback" curl -X PUT -H "Content-Type:application/json" -d "{ ""playback"": ""start"", ""mode"": ""normal"", ""playlist_id"": 1 }" Turn on the projector curl "http://192.168.88.1/api/v01/contentmgr/remote/power/on" For the conditions under which this command can be issued, see Operating Conditions in the Summary. Turn off the projector curl "http://192.168.88.1/api/v01/contentmgr/remote/power/off" Play playlist ID:1 (V01) (API authentication:

On) curl --digest --user EPSONWEB:admin "http://192.168.88.1/api/v01/contentmgr/playlist/play/1" For the admin section, specify the Web Control Password set in the [Network] menu. Play the playlist (V01) (API authentication: On) (Secure HTTP: Enabled) curl -k --digest --user EPSONWEB:admin "https://192.168.88.1/api/v01/contentmgr/playlist/play/1" If you have installed a trusted certificate on the projector, you do not need to use the -k option. Turn on A/V Mute curl -X PUT -H "Content-Type:application/json" -d "{""mute"": ""on""}" "http://192.168.88.1/api/v02/contentmgr/remote/mute" Enter the following to use Power Shell instead of the command prompt.