Network Guide Using Product via Network A Turn on the product and make sure that your Wi-Fi/Ethernet is working normally. B Insert the software disc into the CD-ROM/DVD drive. Note: If the installation screen does not automatically appear in Windows, double-click the Disk icon in Computer (or My Computer ). C Follow the on-screen instructions. Setting up using WSD (for Windows 8/7/Vista) The product supports Web Services on Devices (WSD). WSD is useful when you want to add a second computer to the network to which the product is connected, or to set up multiple computers at the same time. Note: ❏ To set up a printer/scanner with WSD, the computer and product must be connected to the network.
For details on setting up a network connection from a product’s control panel, see “From the Product’s Control Panel” on page 12 . ❏ You must install the driver before setting up the printer/scanner with WSD. A Verify that the product is turned on. Note: Because Windows 8 installs the WSD driver automatically, you can skip steps 2 to 5. B For Windows 7: Click Start , Computer , and then Network . For Windows Vista: Click Start and then Network . C Right-click the product icon, then click Install . Click Continue in the User Account Control dialog box. Note: ❏ The icon shows the network product name (e.g., EPSONXXXXXX (your product name)).
The product name can be confirmed on the product’s control panel or a network status sheet. For details on confirming on the control panel or printing a network status sheet, see “Displaying the network status and printing a network status sheet” on page 23 . ❏ If Uninstall appears instead of Install , click Uninstall once and retry (for Windows 7 and Vista). D Click Your devices are ready to use ( Your device is ready to use ). E Check the screen and click Close . 8