Network Guide Connecting the Printer to a Smart Device c Important: ❏ Devices directly connected to the printer cannot communicate with each other through the printer. ❏ Smart devices directly connected to the printer cannot access the Internet through the printer. ❏ The printer can be connected by Wi-Fi and Simple AP mode simultaneously. However, if you start a network connection in Simple AP mode when the printer is connected by Wi-Fi, the Wi-Fi is temporarily disconnected. ❏ You cannot connect directly by Wi-Fi when the printer is connected to a computer in Ad Hoc mode. Make the following settings.
Making Simple AP Mode Settings on the Printer Make Simple AP mode settings from the printer's control panel. Related Information & “Simple AP Mode” on page 50 Preparing an Application and Wi-Fi Connection from a Smart Device (Simple AP Mode) Install Epson iPrint on your smart device, and then connect it to the printer. Epson iPrint is a free application for smart devices. This allows you to print photos and other content from the smart device. Related Information & “Preparing an Application and Wi-Fi Connection from a Smart Device (Simple AP Mode)” on page 13 Checking the Connection Using Epson iPrint Check the connection between the printer and the smart device using Epson iPrint.
Related Information & “Checking the Connection Between the Printer and the Smart Device” on page 18 Preparing an Application and Wi-Fi Connection from a Smart Device (Simple AP Mode) Connect the smart device to the printer in Simple AP mode. 1. Install Epson iPrint on your smart device. Install Epson iPrint on your smart device from the following URL or QR code. 13