Network Guide Connecting the Printer and a Computer Replacing or Adding New Access Points If the SSID changes due to the replacement of an access point, or an access point is added and a new network environment is established, reset the Wi-Fi settings. If the SSID changes, you can use the same setup procedure as [Changing the Printer Connection to Wi-Fi]. Related Information & “Connecting to Wi-Fi” on page 24 & “Changing the Printer Connection to Wi-Fi” on page 33 Changing the Printer Connection to Wi-Fi Follow the steps below to change the connection method to Wi-Fi from USB or Ad Hoc mode.
Changing to a Wi-Fi Connection - Windows The following is an example of when the print port is set as EpsonNet Print. 1. Connect the computer to the SSID for the access point that you want to connect to. 2. Insert the software disc supplied with the printer into the computer. Note: If you cannot use the software disc, access the following website, and then download the software from Setup and make the connection settings. This software operates in the same way as the software disc. http://epson.sn 3. Follow the on-screen instructions. 33