Network Guide Connecting the Printer to a Smart Device Connecting the Printer to a Smart Device Connection Types Between the Printer and a Smart Device Use one of the following connection methods to connect the printer to a smart device. The illustrations may vary by model. Wi-Fi Connect the printer and the smart device to the access point. This is the typical connection method for home or office networks where computers are connected by Wi-Fi through the access point.
Related Information & “Connecting by Wi-Fi” on page 10 & “Basic Network Information Used by the Printer” on page 74 Wi-Fi Direct (Direct Connection) Use this connection method when you are not using Wi-Fi at home or at the office, or when you want to connect the printer and the smart device directly. There are two Wi-Fi Direct modes. ❏ Simple AP Mode In this mode, the printer acts as an access point and you can connect up to four devices to the printer without having to use a standard access point. However, devices directly connected to the printer cannot communicate 9