Network Guide Connecting the Printer to a Smart Device 8. Enter the password displayed on the printer's control panel in the smart device. 9. After the connection is established, scroll the screen on the printer's control panel and press Proceed on the printer's control panel. You can check the connection between the printer and the smart device using Epson iPrint.
Related Information & “Checking the Connection Between the Printer and the Smart Device” on page 18 & “Checking the Printer's Network Connection Status” on page 62 Making a Wi-Fi Direct Connection to the Printer in Simple AP Mode (for Android Only) If you have an Android device that supports Wi-Fi Direct, you can connect the smart device to the printer in Simple AP mode by using Wi-Fi Direct mode on the Android device. Note: ❏ Depending on the Android OS version or the model, you may not be able to connect the smart device to the printer by Wi-Fi Direct. The operating procedure is also different.
❏ If you cannot connect using the following procedure, set the printer to Wi-Fi Direct mode, and then try again. 1. Install Epson iPrint on your smart device. Install Epson iPrint on your smart device from the following URL or QR code. http://ipr.to 15