User's Guide Specifications of Originals and Placing Originals *1 Fold in half to set. *2 Originals that are wider than 215.9 mm (8.5 in.) need to be folded in half. *3 The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original approximately 297 mm (11.7 in.) long. Otherwise, the length of the scanned image may be longer than intended as the scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in Epson ScanSmart. You can check the setting by clicking Settings > Scanner Settings tab > Scan Settings button > Main Settings tab on the Epson Scan 2 window.
Related Information & “Carrier Sheet Codes” on page 17 Specifications of Envelopes The specification of envelopes you can load into the scanner. Types of Originals that Require Attention The following types of originals may not be successfully scanned. ❏ Originals with an uneven surface such as letter head paper. 22 Type Size Thickness Loading Capacity of the Carrier Sheet Originals that cannot be loaded directly into the scanner A3*1 A4 B4*1 Letter Legal*1 B5 A5 B6 A6 A8 Custom size: ❏ Width: up to 431.8 mm (17 in.) *2 ❏ Length:
up to 297 mm (11.7 in.) *3 0.3 mm (0.012 in.) or less (excluding the thickness of the Carrier Sheet) 5 sheets Size Measurement Thickness Loading Capacity C6 114×162 mm (4.49×6.38 in.) (standard size) 0.38 mm (0.015 in.) or less 5 envelopes DL 110×220 mm (4.33×8.66 in.) (standard size)