User's Guide Specifications of Originals and Placing Originals Note: ❏ You may need to stop using a Carrier Sheet that is scratched or has been scanned more than 3,000 times. ❏ To scan both sizes and stitch them together, set the appropriate setting in Epson ScanSmart. Click Settings > Scanner Settings tab > Scan Settings button > Main Settings tab on the Epson Scan 2 window. Select Double- Sided as the Scanning Side , and then select Left & Right from Stitch Images . ❏ When scanning a Carrier Sheet by selecting Auto Detect as the Document Size setting on Epson ScanSmart, the image is automatically scanned by applying Paper Skew in the Correct Document Skew setting.
Settings > Scanner Settings tab > Scan Settings button > Main Settings tab on the Epson Scan 2 window. You can check the setting by clicking ❏ The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original approximately 297 mm long. Otherwise, the length of the scanned image may be longer than intended as the scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in Epson ScanSmart. ❏ Only use the Carrier Sheet designed for your scanner. The Carrier Sheet is automatically recognized by the scanner by detecting two small rectangular holes on the front edge. Keep the holes clean and not covered.
Related Information & “Carrier Sheet Codes” on page 17 & “Required Settings for Special Originals in Epson ScanSmart” on page 54 Irregular Shaped Originals Specifications of Irregular Shaped Originals By using the Carrier Sheet sold separately, you can scan originals that are wrinkled, curled, very thin, or irregularly shaped. 39