User's Guide Advanced Scanning Note: ❏ The location of the NFC antenna varies depending on the smart device. See the documentation provided with your smart device for more details. ❏ If the scanner does not communicate with the smart device even after touching it to the tag, try adjusting the position of the smart device and touch it to the tag again. ❏ If there are obstacles such as metal between the scanner’s NFC tag and the NFC antenna of the smart device, the scanner may not be able to communicate with the smart device. ❏ If the scanner is already connected to the Wi-Fi network before using this feature, your smart device will be connected to the scanner using this network.
If not, the scanner and your smart device will be connected in AP mode. In AP mode, you can connect up to four devices to the scanner at the same time. 1. Place the original. 2. Make sure that Epson DocumentScan is installed on your smart device. If not, touch the NFC tag antenna of the smart device to the scanner’s NFC tag. Install Epson DocumentScan on the displayed application page. 3. Touch the NFC antenna of your smart device to the scanner’s NFC tag. Epson DocumentScan starts, and the scanner and the smart device are connected automatically. 4. Follow the Epson DocumentScan on-screen instructions for information on scanning.
Related Information & “Buttons” on page 12 & “Placing Originals” on page 24 66