Command List of the Alphabetical Order 1 "Priority" indicates the function is executed with priority. ESC/Label Command List Rev. C SHEET13 CW-C4000 series Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label Definition range Factory-set initial value Corresponding ZPL II command Priority 1 ^FM Multiple field origin locations in PDF417 Divides a PDF-417 or micro PDF-417 barcode and renders it at each specified coordinate. Format ^FMx1,y1,x2,y2,… x1: X coordinate of the 1st symbol [dot] 0 ≤ x1 ≤ 32000, x1 = e e: Remove from rendering target 0 ≤ x1 ≤ 32000, x1 = e e: Remove from rendering target ^FM Low y1:
Y coordinate of the 1st symbol [dot] 0 ≤ y1 ≤ 32000, y1 = e e: Remove from rendering target 0 ≤ y1 ≤ 32000, y1 = e e: Remove from rendering target x2: X coordinate of the 2nd symbol [dot] 0 ≤ x2 ≤ 32000, x2 = e e: Remove from rendering target 0 ≤ x2 ≤ 32000, x2 = e e: Remove from rendering target y2: Y coordinate of the 2nd symbol [dot] 0 ≤ y2 ≤ 32000, y2 = e e: Remove from rendering target 0 ≤ y2 ≤ 32000, y2 = e e: Remove from rendering target ... (max 60pairs) (max 60pairs) ^FN Field number Allots a field number to the field. Format ^FNn n: Field number 0 ≤ n ≤ 9999 0 ≤ n ≤ 9999 ^FN Low ^FO Field origin location Sets the field origin location relative to the home position.
Format ^FOx,y,j x: X coordinate of field origin on label [dot] 0 ≤ x ≤ 32000 0 ≤ x ≤ 32000 ^FO Low y: Y coordinate of field origin on label [dot] 0 ≤ y ≤ 32000 0 ≤ y ≤ 32000 j: Specifies field origin location j = 0/1/2 0: Left 1: Right 2: Auto j = 0/1/2 0: Left 1: Right 2: Auto ^FP Set field text format Sets the format for character string rendering in the current field. Format ^FPd,s d: Field character string rendering direction d = H/V/R H: Horizontal (Left-to-right) V: Vertical (Top-to-bottom) R: Horizontal (Right-to-left) d = H/V/R H: Horizontal (Left-to-right) V: Vertical (Top-to-bottom) R: Horizontal (Right-to-left) ^FP Low s:
Added amount of space between characters [dot] 0 ≤ s ≤ 9999 0 ≤ s ≤ 9999 ^FR Set field reverse print Sets monochrome reversal for field rendering. Format ^FR None None None ^FR Low ^FS Field separator Ends the field definition. Format ^FS None None None ^FS Low ^FT Field origin location Sets the field's rendering origin relative to the home position. Format ^FTx,y,j x: X coordinate of field rendering origin on label [dot] 0 ≤ x ≤ 32000 0 ≤ x ≤ 32000 ^FT Low y: Y coordinate of field rendering origin on label [dot] 0 ≤ y ≤ 32000 0 ≤ y ≤ 32000 j: Rendering origin in the field j = 0/1/2 0: Left 1: Right 2: Auto j = 0/1/2 0: Left 1: Right 2:
Auto ^FV Field variable Renders the field data to the field. Format ^FVdata data: Variable field data Up to 3,072 bytes of ASCII code, excluding characters set for the prefix Up to 3,072 bytes of ASCII code, excluding characters set for the prefix ^FV Low