Command List of the Alphabetical Order 1 "Priority" indicates the function is executed with priority. ESC/Label Command List Rev. C SHEET16 CW-C4000 series Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label Definition range Factory-set initial value Corresponding ZPL II command Priority 1 ~H(C LM Send media type Sends media type (label edge detection, media form, media source, media shape, or media coating type). Media configuration ~H(CLM,b b=D: Label edge detection None None High b=F: Media form None None b=P: Media source None None b=S: Media shape None None b=T:
Media coating type None None ~H(C LP Send paper feeding adjustment Sends paper feed amount, or cut position adjustment. Media configuration ~H(CLP,b b=O: Cut position adjustment [dot] None None High b=T: Continuous paper leading edge adjustment [dot] None None ~H(C LR Send resolution settings Sends resolution settings (printing, rendering, or rendering of background image loaded with the overlay function). Printer setting ~H(CLR,b b=B: Background image rendering resolution [dpi] None None High b=M: Print resolution magnification None None b=P: Print resolution [dpi] None None b=R: Format base in dots per inch [dpi] None None b=Z:
Print resolution of replaced printer [dpi] None None ~H(C LS Send media setting Sends media layout (gap between labels, left gap, label length, or label width). Media configuration ~H(CLS,b b=C: Gap between labels [dot] None None High b=G: Left gap [dot] None None b=L: Label length [dot] None None b=P: Label width [dot] None None ~H(C LV Send media size error Sends setting value for media size error detection. Media configuration ~H(CLV,b b=H: Media size error (width) detection None None High b= V:
Media size error (length) detection None None ~H(C MF Send feed operation Sends the setting of the media feed sequence when the power is turned on and the media is changed, or the setting of the media suction strength. Printer setting ~H(CMF,b b=H: Operation at change media None None High b=M: Manual paper suction strength None None b=P: Operation at power on None None b=S: Paper suction strength None None ~H(C MN Send nozzle clogging recovery enabled/disabled Sends whether the automatic nozzle clogging recovery function is enabled/disabled. Printer setting ~H(CMN,b b=S:
Enable/disable nozzle clogging recovery None None High ~H(C MP Send print operation mode settings Sends print operation settings (print operation mode, basic printer unit system, or printing direction). Printer setting ~H(CMP,b b=M: Print operation mode None None High b=U: Basic printer unit system None None b=D: Printing direction None None ~H(C MS Send printing control adjustment amount Sends setting value for printing control adjustment amount. Printer setting ~H(CMS,b b=C: Wait time adjustment for closing caps [sec] None None High b=H:
Drying time per head pass [sec] None None ~H(C MT Send auto cleaning on designated time setting Sends settings for auto cleaning on designated time (auto cleaning on designated time or time to start auto cleaning). Printer setting ~H(CMT,b b=T: Time to start auto cleaning None None High