Command List of the Alphabetical Order 1 "Priority" indicates the function is executed with priority. ESC/Label Command List Rev. C SHEET18 CW-C4000 series Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label Definition range Factory-set initial value Corresponding ZPL II command Priority 1 ~H(Q IQ Send remaining ink Sends the remaining ink for all colors in the printer. Status ~H(QIQ None None None High ~H(Q MN Send available capacity in maintenance box Sends the available capacity in the maintenance box.
Status ~H(QMN None None None High ~H(Q WN Send warnings Sends all types of warnings that occurred at the point in time when the printer received the command. Status ~H(QWN None None None High ~H(S CM Send maintenance counter Sends maintenance counter value to the host. Status ~H(SCM,b b=C : Auto cutter counter None None High b=O : Operating time (hour) None None ~H(S CN Send non-resettable counter Sends non-resettable counter value to the host. Status ~H(SCN,b b=C: Non-resettable counter (centimeter) None None High b=I: Non-resettable counter (inch) None None b=L:
Non-resettable counter (printed label number) None None ~H(S DS Send available capacity in the drive Sends the available capacity in the drive accessible by the user. Status ~H(SDS,b b=A: Available capacity in drive A None None High b=B: Available capacity in drive B None None b=E: Available capacity in drive E None None b=R: Available capacity in drive R None None ~H(S EA Send error status Sends the error status (error name). Status ~H(SEA,b b=E: Error status None None High b=F: Fatal error status None None ~H(S LS Send media detection Sends the size of the media detected by the printer. Media configuration ~H(SLS,b b=H: Media width None None High b=V:
Media length None None ~H(S MA Send printer operation status Sends the printer operation status. Status ~H(SMA,b b=S: Printer operation status None None High ~H(S PA Send print stopping status Sends the status in which factors that stop printing occurred. Status ~H(SPA,b b=C: Cover open status None None High b=O: Panel operation waiting status None None b=P: Paper out status None None b=S: Pause status None None ~H(S PB Send buffer full status Sends the buffer full status. Status ~H(SPB,b b=F: Buffer full status None None High ^H(Y Upload file Sends the contents of the file to the host. Miscellaneous ^H(Yd:o.x d: Storage drive d = R/E/B/A R: Volatile memory E: Non-volatile memory B:
Optional memory A: Optional memory d = R/E/B/A R: Volatile memory E: Non-volatile memory B: Optional memory A: Optional memory Low o: File name ASCII code within 8 characters ASCII code within 8 characters x: Extension x = GRF/PNG/TTE/TTF/BGD/FNT/UCL x = GRF/PNG/TTE/TTF