Command List of the Alphabetical Order 1 "Priority" indicates the function is executed with priority. ESC/Label Command List Rev. C SHEET24 CW-C4000 series Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label Definition range Factory-set initial value Corresponding ZPL II command Priority 1 ^S(C LB Set background image setting file Sets the setting file to specify the image file for the background image loaded in the overlay function. Graphic ^S(CLB,b,c b=I: Background image setting file c=d: o.x d = A/B/E/R/Z o = ASCII code within 8 characters x = BGD/PNG c=d:
o.x d = A/B/E/R/Z o = ASCII code within 8 characters x = BGD/PNG None Low Sets the background image application position on the [X-axis] b=X: Background image X position [dot] 0 ≤ c ≤ 32000 0 ≤ c ≤ 32000 0 Sets the background image application position on the [Y-axis] b=Y: Background image Y position [dot] 0 ≤ c ≤ 32000 0 ≤ c ≤ 32000 0 ^S(C LE Set paper edge adjustment Sets the paper edge (left edge or leading edge) position adjustment. Media configuration ^S(CLE,b,c b=L: Logical label left edge position adjustment [dot] -9999 ≤ c ≤ 9999 -2551 ≤ c ≤ 2551 0 ^LS Low b=M: Physical label left edge position adjustment [dot] -9999 ≤ c ≤ 9999 -36 ≤ c ≤ 36 0 b=T:
Physical label leading edge position adjustment [dot] -9999 ≤ c ≤ 9999 -258 ≤ c ≤ 258 0 ^LT ^S(C LM Select media type Selects media type (label edge detection, media form, media source, media shape, or media coating type). Media configuration ^S(CLM,b,c b=D: Label edge detection c=M/W/N M: Black mark detection W: Gap detection N: No detection c=M/W/N M: Black mark detection W: Gap detection N: No detection W ^MN Low b=F: Media form c=CP/DL/CL/WB CP: Continuous paper DL: Die-cut label CL: Continuous label WB: Wristband c=CP/DL/CL/WB CP: Continuous paper DL: Die-cut label CL: Continuous label WB: Wristband DL b=P: Media source c = IR/ER IR: Internal roll ER: External feed c = IR/ER IR:
Internal roll ER: External feed IR b=S: Media shape c = RP/FP RP: Roll paper FP: Fanfold paper c = RP/FP RP: Roll paper FP: Fanfold paper RP b=T: Media coating type c= P1/P2/P3: Plain Paper M1/ M2 M3: Matte Paper S1/S2/S3: Synthetic G1/G2/G3: Glossy Paper GS1/GS2/GS3: Glossy Film PG1/PG2/PG3: High Glossy Paper T1/T2/T3: Texture Paper WB1/WB2/WB3: Wristband c= P1: Plain Paper M1: Matte Paper S1: Synthetic G1: Glossy Paper GS1: Glossy Film PG1: High Glossy Paper T1: Texture Paper WB1: Wristband M1 ^S(C LP Set paper feeding adjustment Sets paper feed amount, or cut position adjustment. Media configuration ^S(CLP,b,c b=O: Cut position adjustment [dot] -255 ≤ c ≤ 255 -255 ≤ c ≤ 255 0 ~TA Low b=T:
Continuous paper leading edge adjustment [dot] -9999 ≤ c ≤ 9999 0 ≤ c ≤ 71 0