^FH [Name] Set hexadecimal identifier [Format] ^FH i [Function] Sets the hexadecimal identifier to the field. This command is a command for specifying the characters to set to the field data in hexadecimal character code. After executing this command, perform specification by character code in the data of the first “^FD” or “^FV”. The character specified in Parameter i is set to the hexadecimal identifier. One byte code for two hexadecimal digits is written as the hexadecimal identifier and two following hexadecimal digits. [Response] None [Reference] Related commands: ^FD , ^FV [Usage example] ^XA ^FO100,100 ^FH_ 1. Sets the underscore as the hexadecimal identifier. ^FD_31_41^FS 2.
Expresses the numeral 1 as and the letter A of the alphabet as . ^XZ ESC/Label Command Reference Guide Rev. L Page 111 Parameters Description Definition range i Hexadecimal identifier 1 character in ASCII code