^FW [Name] Set default field orientation [Format] ^FW o ,j [Function] Sets the default field orientation and origin position. When the origin coordinate is specified by “^FO” and “^FT” for each field, if the field orientation is omitted, the default field orientation set in this command is applied. The default field orientation is set based on Parameter o. ESC/Label Command Reference Guide Rev. L Page 123 Parameters Description Definition range o Default field orientation o = N/R/I/B N: Normal R: 90° rotation (clockwise) I: 180° rotation B: 270° rotation (clockwise) j Default field origin location j = 0/1/2 0: Left 1: Right 2: Auto