^GF [Name] Bitmap graphic [Format] ^GF f ,t ,s ,w ,data [Function] Renders the black and white bitmap graphic to the field. The rendered dots of the bitmap graphic are specified based on Parameter data. The size of the bitmap graphic is specified based on Parameter s. The horizontal width is specified based on Parameter w. The data format for the bitmap graphic is as follows. (Example where w = 3 (3 Ч 8 = 24 [dot] width), s = 9) If the number of dots in the longitudinal direction of the bitmap graphic is H [dot], then s = H Ч w. 1 byte of data expresses 8 dots. Therefore, if the data is F0H, then these 8 dots are rendered as follows. ESC/Label Command Reference Guide Rev.
L Page 130 Parameters Description Definition range f Data format f = A/B/C A: Hexadecimal character string B: Binary C: Compressed binary t Graphic data size [byte] 0 ≤ t ≤ 9999999 (Varies depending on the model) s Graphic size [byte] 0 ≤ s ≤ 9999999 (Varies depending on the model) w Horizontal width (Number of horizontal dots, divided by 8. Fractions are cut off.) 0 ≤ w ≤ 9999999 (Varies depending on the model) data Graphic data Hexadecimal character string or binary (Specified in Parameter f) MSB LSB MSB LSB MSB LSB H 1 byte 2 bytes 3 bytes 4 bytes 5 bytes 6 bytes 7 bytes 8 bytes 9 bytes w 1 1 1 1 0 0 0 0