~HS [Name] Transmit printer status [Format] ~HS [Parameter] None [Function] Transmits the printer status to the host. [Initial value] None [Response] The printer transmits the printer status value according to the following data format. aaa,b,c,dddd,eee,f,g,h,iii,j,k,l mmm,n,o,p,q,r,s,t,uuuuuuuu,v,www xxxx,y Control code that indicates start of text (02H) a to y Status value (Each character shows the figure of one digit, and the value of each status is delimited by the comma).
Control code that indicates end of text (03H) Control code that indicates carriage return (0DH) Control code that indicates line feed (0AH) The explanation and the range of each status value are shown in the table below. ESC/Label Command Reference Guide Rev. L Page 150 Status value Description Definition range aaa Reserved Fixed at 000 b Out of paper 1: Out of paper 0: Not out of paper c Paused 1: Paused 0: Not paused dddd Label length [dot] 0000 to 99991 eee Number of label formats in receive buffer 000 to 999 f Buffer full status 1: Buffer full status 0: Not buffer full status g Reserved Fixed at 0 h Partial label format being defined 1: Partial label format being defined 0:
Partial label format not being defined iii Reserved Fixed at 000 j Reserved Fixed at 0 k Reserved Fixed at 0 l Reserved Fixed at 0 mmm Reserved Fixed at 000 n Reserved Fixed at 0 o Cover open 1: Cover open2 0: Cover not open