~JS [Name] Set backfeed procedure [Format] ~JS b [Function] The ~JS command controls backfeed operation after printing and cutting. After printing and cutting, the printer backfeeds paper. The printing and cutting position is the 0% position and the maximum backfeed position is 100%. If this command is used to specify any position other than 100%, the printer will first backfeed to the 100% position before starting to print the next label. If A is specified for parameter b, the printer backfeeds to the 100% position after printing and cutting. If B is specified for parameter b, the printer backfeeds to the 0% position after printing and cutting.
If N is specified for parameter b, the printer backfeeds to the standard position after printing and cutting. If a numerical value is specified for parameter b, the printer backfeeds to the position of the specified percentage after printing and cutting. Only multiples of 10 can be specified if specifying a numerical value. This command can be used with both printers with or without a cutter. [Response] None [Reference] Related commands: None ESC/Label Command Reference Guide Rev. L Page 167 Parameters Description Definition range b Backfeed sequence b = A/B/N or 10 ≤ b ≤ 90 A: 100% backfeed after printing and cutting B: 0% backfeed after printing and cutting N:
Backfeed to the standard position after printing and cutting Numerical value: Only multiples of 10 can be specified. Backfeed to specified percent value position after printing and cutting