^S(C [Name] Printer operation mode settings [Format] ^S(C a ,b ,c [Function] Sets the printer operation mode. Sets Parameter c to the printer operation mode specified in Parameter a, b. A printer operation mode is information that determines the operation of the printer. Refer to Appendix A for a list of printer operation modes. [Initial value] Varies depending on the model. [Response] None [Reference] Related function specifications: 2.5 Getting and Setting Printer Information Related commands: ~H(C [Note] The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the “^JU” command section for details.
[Usage example] An example of sending data that sets the resolution and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^S(CLR,P,300 1. Sets the current resolution to 300 [dpi]. ^JUS 2. Saves the setting to non-volatile memory. ^XZ ESC/Label Command Reference Guide Rev.
L Page 194 Parameters Description Definition range a Printer operation mode function identifier a = 2-character ASCII string For details, see the identifiers in Appendix A List of Printer Operation Modes b Printer operation status object identifier b = 1-character ASCII string For details, see the identifiers in Appendix A List of Printer Operation Modes c Setting value c= ASCII character string of undefined length For details, see the definition range in Appendix A List of Printer Operation Modes