Appendix B List of Printer Operation Statuses Printer operation status indicates the condition/status of the printer at that point in time. The list of printer operation statuses is shown in Table B-1. Use the “~H(S” (get printer operation status) command to get the printer operation status. When using this command, specify and as the command parameter. Use the “~H(S” command to get printer operation mode values. In Table B-1, the printer operation status whose definition range may vary depending on the model is checked at the column of “Model dependence for definition range”.
The printer operation status whose function may not be supported depending on the model is checked at the column of “Model dependence for function support”. Refer to the attached Command List also for details regarding model dependence. ESC/Label Command Reference Guide Rev. L Page 224