Appendix C List of Printer Information Printer unique information indicates details about the printer and its characteristics. The list of printer information is shown in Table C-1. Use the “~H(I” (send printer unique information) to get printer information. When using this command, specify and as the command parameter. Use the “~H(I” command to get printer unique information. In Table C-1, the printer information whose function may not be supported depending on the model is indicated in the “Model dependence for function support” column. Table C-1 List of Printer Information ESC/Label Command Reference Guide Rev.
L Page 228 Function identifier Function Description of object identifier Definition range Model dependence for function support Corresponding ZPL II command MF Firmware version C = Printer built in font version ASCII, within 8 characters None V = Firmware version ASCII, within 8 characters ^HH/~HI/^HZ MM Model information I = Ink model ASCII, within 2 characters None MP Printer name S = Serial number ASCII, 10 characters None