2.2.3 Label Edge Detection Label edge detection sets the detection methods, such as black mark and gap. Table 2.2.4 Label Edge Detection 2.2.4 Media Source The media source sets the method for supplying paper to the printer. Table 2.2.5 Media Source 2.2.5 Media Shape The media shape sets differences between media shape, such as roll shape and folded shape. Table 2.2.6 Media Source ESC/Label Command Reference Guide Rev. L Page 23 Name Description Command format Black mark detection The black mark attached at the leading edge of the label is detected. ^S(CLM,D,M Gap detection The gap between labels is detected. ^S(CLM,D,W No detection Printer does not detect the leading edge of the label.
^S(CLM,D,N Tag hole detection The holes or cut-outs in the paper are detected. ^S(CLM,D,H Name Description Command format Internal roll media The printer receives paper from the internal roll paper supply mechanism. ^S(CLM,P,IR External feed The printer receives paper from an external paper supply. ^S(CLM,P,ER Name Description Command format Roll paper Paper formed to roll shape. ^S(CLM,S,RP Fanfold paper Paper folded ^S(CLM,S,FP