3 Detailed Command Specifications This chapter describes the content shown in the following table for each command. Command code Pre-fix character and command identifiers [Name] Command name [Format] Codes that configure the command [Parameter] Parameter description, definition range, behavior when command is executed with parameters omitted. The definition range is the range of values required for the parameter to achieve normal command operation. [Function] Command function [Initial value] Initial value setting. The initial value is the value set when the available period of the setting value is started.
[Response] Description of response sent from the printer, format, and the parameters that configure the response. [Reference] Specifications that should be referenced in this document to use this command appropriately. Related function specifications Function names of functions specifications that should be referenced. Related commands Command code for detailed command specifications that should be referenced. Describe command specification with supplemental items which are required based on command functions and characteristics. [Note] Notes to be considered when executing the command, such as command execution conditions. [Usage example] Examples of the use of the command.
ESC/Label Command Reference Guide Rev. L Page 43