[Function] Sets the Aztec Code symbol to the field. Sets the field orientation based on Parameter o. Sets the module size for symbol rendering based on Parameter m. Enables/disables the extended channel interpretation (ECI) function based on Parameter e. Sets the error correction level, mode type, and data layer count based on Parameter t. If the Parameter t is 0, the error correction level is set to 23[%]. If the Parameter t is 01 to 99, the error correction level[%] is set to the value for t. If the Parameter t is 101 to 104, the mode type is set to Compact, and the data layer count is set to the last one digit of t.
If the Parameter t is 201 to 232, the mode type is set to Full-Range, and the data layer count is set to the last two digit of t. If the Parameter t is 300, the mode type is set to Rune. Sets the leader initialization symbol based on Parameter i. Sets the number of symbols to split via structured append based on Parameter n. Sets the message ID for the structured append based on Parameter id. [Response] None [Reference] Related commands: ^FW ESC/Label Command Reference Guide Rev. L Page 53