^B3 [Name] Code 39 barcode [Format] ^B3 o ,c ,h ,i ,a [Function] Sets Code 39 barcode to the field. Sets the field orientation based on Parameter o. Sets the check digit printing based on Parameter c. Sets the barcode height based on Parameter h. Sets the HRI character printing based on Parameter i. Sets whether to position the added HRI characters on the top or on the bottom of the barcode based on Parameter a. The ratio for the widths of the thick and thin bars in Code 39 rendering processing follows the setting of “^BY”.
[Encoding] Numerals (0 to 9), capital letters of the alphabet (A to Z), hyphens , periods , blank spaces >, dollar symbols , slashes , plus symbols , and percent symbols can be encoded. If the width of the barcode to be rendered exceeds the label width, only the part that fits in the label width will be printed. The check digit is added automatically. The check digit is calculated by modulus 43. An asterisk is added automatically to the start code and stop code. The start code and stop code are printed as part as the HRI character. [Response] None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev.
L Page 55 Parameters Description Definition range o Code 39 field orientation o = N/R/I/B N: Normal R: 90° rotation (clockwise) I: 180° rotation B: 270° rotation (clockwise) c Set/cancel check digit printing for Code 39 c = Y/N Y: Set N: Cancel h Code 39 barcode height [dot] 1 ≤ h ≤ 32000 (Varies depending on the model) i Set/cancel of HRI character addition for Code 39 i = Y/N Y: Set N: Cancel a Set/cancel of HRI character addition for top of Code 39 barcode a = Y/N Y: Set N: Cancel