^BD [Name] MaxiCode [Format] ^BD m ,n ,q [Function] Sets the MaxiCode symbol to the field. Sets the mode based on Parameter m. If m = 2 or 3, the structured carrier message is set. EEC is applied to the primary message and SEC to the secondary message. If m = 4, the standard symbol is set. EEC is applied to the primary message and SEC to the secondary message. If m = 6, the reader program symbol is set. EEC and SEC are error correction methods. EEC stands for Enhanced Error Correction, and SEC stands for Standard Error Correction. Sets the number of this symbol in the set of structured append symbols based on Parameter n.
Sets the total number of structured append symbols based on Parameter q. If m = 5, full EEC is set. EEC is applied to both the primary message and the secondary message. ESC/Label Command Reference Guide Rev. L Page 69 Parameters Description Definition range m MaxiCode mode m = 2/3/4/5/6 2: Structured carrier message: numeric postal code (U.S.A.) 3: Structured carrier message: alphanumeric postal code (International) 4: Standard symbol 5: Full EEC 6: Reader program n Number in the MaxiCode structured append 1 ≤ n ≤ 8 q Total number of symbols in the MaxiCode structured append 1 ≤ q ≤ 8