^BK [Name] Codabar barcode [Format] ^BK o ,c ,h ,i ,a ,b ,e [Function] Sets Codabar barcode to the field. Sets the field orientation based on Parameter o. Sets the barcode height based on Parameter h. Sets the HRI character printing based on Parameter i. HRI characters include the start and stop characters. Sets whether to position the added HRI characters on the top or on the bottom of the barcode based on Parameter a. Sets the start character based on Parameter b. Sets the stop character based on Parameter e. The ratio for the widths of the thick and thin bars in Codabar rendering processing follows the setting of “^BY”.
[Encoding] Numerals and symbols (hyphens , colons , periods , dollar symbols , slashes , and plus symbols ) can be encoded. If the width of the barcode to be rendered exceeds the label width, only the part that fits in the label width will be printed. [Response] None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev. L Page 74 Parameters Description Definition range o Codabar field orientation o = N/R/I/B N: Normal R: 90° rotation (clockwise) I: 180° rotation B: 270° rotation (clockwise) c Printing of a Codabar check digit c = N (Fixed) N:
No h Codabar barcode height [dot] 1 ≤ h ≤ 32000 (Varies depending on the model) i Set/cancel of HRI character addition for Codabar i = Y/N Y: Set N: Cancel a Set/cancel of HRI character addition for top of Codabar barcode a = Y/N Y: Set N: Cancel b Codabar start character b = A/B/C/D/T/N/E/* e Codabar stop character e = A/B/C/D/T/N/E/*