^C(L [Name] Load temporary saved image of drawing canvas [Format] ^C(L [Parameter] None [Function] The ^C(L command loads the image of drawing canvas of format which was temporarily saved by using ^C(S command, and puts the image onto the current format. This command puts the saved image onto the current drawing canvas only when the size of the drawing canvas of current format and the size of the saved image are same. The canvas of current format is overwritten with the saved image by the putting process of this command. You shouldn’t use this command together with ^IS command and N setting of ^MC command.
[Initial value] None [Response] None [Reference] Related function specifications: None Related commands: ^C(D , ^C(S ESC/Label Command Reference Guide Rev. L Page 87