GENERAL SPECIFICATIONS 1-6 E URO C ARGO E URO 4 - 5 1.4 Guarantees Guarantees The bodybuilder/chassis converter who has built the body or who has modified the chassis must guarantee that the work was undertaken in a professional manner in full compliance with the specifications contained in this manual. IVECO reserves the right to declare void its own warranties for the vehicles where: - These specifications have not been adhered to or where unauthorised equipment was installed, or unauthorised modifications were carried out. - The chassis was used in a way which is not suitable for the equipment or for the intended purpose of the vehicle.
- The specifications, standards or instructions issued by the Manufacturer for the flawless execution of the operations have not been heeded. - Original spare parts or components which the Manufacturer has made available for specific interventions were not used. 1.5 Request for a “no objection” The requests for a “no objection” or support to carry out work or make modifications or fittings shall be forwarded to the IVECO marketing offices in charge. To obtain a “no objection”, the body builder shall provide adequate documents that illustrate the anticipated implementation, utilization and conditions of use on the vehicle.
The drawings shall highlight any item differing from the instructions contained in this manual. The body builder shall submit the modification and/or fitting to the competent authorities for the “no objection”. 1.6 IVECO technical documents available by means of computer The following technical documents are available on the Internet at www.thbiveco.com: - directives for transformation and equipping of vehicles; - technical cards; - chassis cab diagrams; - chassis diagrams; - other specifications concerning the vehicle range. The body builder shall submit the modification and/or fitting to the competent authorities for the “no objection”.
1.7 Trademarks and Logos Trademarks, nameplates and denominations must not be modified or displaced in relation to the original design. The appearance of the vehicle must not be changed or modified. The application of trademarks tied to the transformation or trim levels must be authorised by IVECO. They must not be applied near to the IVECO tradenames or logos. IVECO reserves the right to withdraw the tradenames and logos if the fitting or conversion fails to conform with requirements. The bodybuilder accepts all responsibility for the entire vehicle. Guarantees Base - July 2006 Revi - June 2007 Print 603.93.431