System Messages - Alphabetical List *Invalid ACE Sight tool index* (-772) Explanation: The index of the vision tool in the eV+ vision command call does not exist. The ACE Sight vision tool index is not valid. User action: Check the sequence and the eV+ code. *Invalid argument* (-407) Explanation: An argument for a function, program instruction, or SEE editor command is not in the accepted range. User action: Verify the range of arguments for the function, program instruction, or editor command being used. *Invalid connection specified* (-540) Explanation: An invalid logical network connection has been specified. For example, a zero connection ID is invalid. User action:
Specify a valid logical connection ID. *Invalid disk format* (-520) Explanation: An attempt has been made to read a disk that is not formatted, or is formatted improperly; or a FORMAT command has been entered that specifies invalid format parameters for the device specified. User action: If a FORMAT command has been entered, verify the command syntax and retry the command. Otherwise, try a different diskette or reformat the current one. Remember that formatting erases all information on the diskette. If the diskette was created on an IBM PC, be sure it was formatted with one of the formats accepted by the eV+ system. *Invalid error code* Belt n (-1010) Explanation:
An unrecognized error was reported by the controller for the indicated conveyor belt. User action: Attempt the operation again. If the error repeats, report the situation to Omron Adept Application Engineering. *Invalid format specifier* (-461) Explanation: An unrecognized output format specifier was encountered in a TYPE or WRITE instruction, or in an $ENCODE function. User action: Edit the program to use a valid format specifier. eV+Language Reference Guide, v2.x, 18319-000 Rev A Page 619