Introduction Introduction System parameters determine certain operating characteristics of the eV+ system. These parameters have numeric values that can be changed from the command line or from within a program to suit particular system configurations and needs. The various parameters are described in this chapter along with the operations for displaying and changing their values. System switches are similar to system parameters in that they control the operating behavior of the eV+ system. Switches differ from parameters, however, in that they do not have numeric values. Switches can be set to either enabled or disabled, which can be thought of as on and off, respectively.
All the basic system switches are described in this chapter. The monitor commands and program instructions that can be used to display and change their settings are also presented. eV+Language User's Guide, v2.x, 18318-000 Rev A Page 93