FRENAME monitor command FRENAME monitor command Syntax FRENAME new_file = old_file Function Change the name of a disk file. Parameters new_file New file specification to which the file is renamed. If necessary to locate the file, this parameter can include an optional physical device, an optional disk unit, and an optional directory path, in addition to the file name and extension. The current default device, unit, and directory path are considered as appropriate (see the DEFAULT command). An error will occur if this name is already in use. old_file Name of the file that is to be renamed. If the file does not exist, an error will occur.
No device, disk unit, or directory path may be specified. Details Only the name of the file is changed. The file contents and size are not affected. Example Change the name of the existing file "data.v2" on disk "D" to the name "parts.v2". (Note that the disk unit if specified must be on the left , as shown.) FRENAME D:parts.v2 = data.v2 Related Keywords FCOPY monitor command RENAME monitor command eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 100