INSTALL monitor command INSTALL monitor command Syntax INSTALL password op Function Install or remove software options available to Omron Adept systems. Usage Considerations You must have received the authorization password from Omron Adept. INSTALL can be used only on CPU #1 in multiple CPU systems. Parameters password A 15-character string assigned by Omron Adept op Optional integer indicating the desired operation: 0 = install option (default) 1 = remove option Details When you purchase additional software options from Omron Adept, the software is delivered with a software license and authorization code that enables the software for a particular controller.
If the option is not enabled, the software option will not be available for use. The password is keyed both to the software option and the serial number of your controller. The password cannot be used on any controller other than the one for which you purchased the software option. Example If you purchase a software option from Omron Adept and the password provided with the option is 4EX5-23GH8-AY3F, the following command will enable the software option: INSTALL 4EX5-23GH8-AY3F NOTE: Some options, such as AIM software, have additional software that must be copied to the hard drive. Other options are already resident in the eV+ system and need only to be enabled.
Related Keyword INSTALL program instruction eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 110