SWITCH monitor command SWITCH monitor command Syntax SWITCH switch[index] Function Display the settings of system switches on the Monitor screen. Usage Considerations If no switch name is given, the current settings of all the system switches are displayed on the screen. Parameters switch Optional name of a system switch to be displayed. The switch name can be abbreviated as described below. index For switches that can be qualified by an index, this is an optional real value, variable, or expression that designates the specific switch element of interest (see below). Details This command displays the settings of the specified switch as "On" (enabled) or "Off" (disabled).
If no switch name is specified, the status of all system switches is displayed. Refer to Basic System Switches for more information on the different switches A subset of the complete list can be displayed by providing an abbreviation for the switch name. Then, all the switches with names beginning with the specified root will be displayed with their current settings. If the specified switch accepts an index qualifier and the index is zero or omitted (with or without the brackets), all the elements of the switch array are displayed.
If the switch name is omitted, but an index is specified, the values of all switches without indexes are displayed along with the specified element of all switch arrays. The switch names acceptable with the standard eV+ system are summarized in the eV+ Operating System User's Guide . Some system switches are available only when options are installed in the eV+ system. Refer to the option documentation for details. eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 179