TIME monitor command TIME monitor command Syntax TIME dd-mmm-yy hh:mm:ss TIME dd-mmm-yyyy hh:mm:ss Function Set or display the date and time. Parameters dd-mmm-yy hh:mm:ss or Optional date and time specification (see below). If omitted, the time is displayed. If specified, the system clock is changed and all of the elements (except ":ss") must be included. dd-mmm-yyyy hh:mm:ss The individual elements of the date and time specification are defined as follows:
dd The day of the month (1 to 31) mmm The month, specified as a 3-letter abbreviation (JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, or DEC) yy The year, where 80 to 99 represent 1980 through 1999, respectively, and 00 to 79 represent 2000 through 2079, respectively yyyy The year (1980 to 2079) hh The hour of the day (0 to 23) mm Minutes past the hour (0 to 59) ss Seconds past the minute (0 to 59; 0 assumed if ":ss" omitted) Details The system clock is maintained automatically and should be changed only when its values are incorrect (e.g., the controller is moved to a different time zone). The system clock is used in the following situations:
eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 182