Safety Information in Handling Consumables (Ink, Maintenance Liquid) and Waste Ink 13 CAUTION During maintenance work, wear all the protective equipment described in "Personal Protective Equipment" (eye protection, protective gloves, respiratory protection, etc.) in each section below. Long hair should be tied back and worn under a hair net. Use protective equipment compliant with the safety regulations. Using additional protective equipment compliant with the safety regulations is recommended when necessary. Do not allow any person on the machine while working. Note that the machine is not designed to support the weight and can be easily damaged.
When performing maintenance to parts on the upper part of the machine, use a tool, such as a step stool, appropriate for the work. Failure to do so could lead to injury or damage to the machine. Make sure that all maintenance work is performed at room temperature. WARNING If fluid gets on your skin or enters your eyes or mouth, take the measures below. If fluid gets on your skin, rinse immediately with soap and water. If the liquid enters your eyes, rinse immediately with water. Failure to observe this precaution could result in bloodshot eyes or mild inflammation. If problems persist, consult with a physician. If the liquid enters your mouth, consult a physician immediately.
Do not disassemble or remodel the cartridge. Otherwise, the ink and/or cleaning liquid could get in your eyes or come in contact with your skin. Keep ink cartridges, maintenance liquid, cleaning liquid, scan spindle grease, waste ink, glue, remover, and ink film remover out of the reach of children.