Name and Function of Each Part Name of Each Part This section describes the name and function of each part including major parts. Front 15 14 24 No. Name Description 1 Emergency stop button Stops operation of this machine immediately. 2 Maintenance window for mist filter Use this maintenance window to clean/replace the mist filter. 3 Pause button Printing is paused and the print head stops in the flushing area or the cleaning station area. 4 Ink tank housing This housing contains the sub-tank rack. 5 Flushing area This contains the flushing plate, and the print head performs flushing here.
6 Water supply valve on the belt cleaning unit This is the valve on the belt cleaning unit that supplies water to the unit. 7 Belt cleaning unit This unit contains the belt cleaning tank for cleaning ink and other foreign material adhering to the belt. 8 Belt This belt feeds fabric attached to it. 9 Waste ink tank The waste ink tank is located on the cleaning station side on the right side. (For models with waste ink tanks) 10 Cleaning station area Caps and wipers are located at the top, for performing cleaning and replacement.