2.1.3 DSBC-…-E1 / E2 / E3 (with end-position locking) 1 2 Additional components 1 Slot in the piston rod for the end- position locking: Piston rod advanced 3 2 Slot in the piston rod for end- position locking: Piston rod retracted 3 Rear end-position locking (piston rod retracted) 4 Front end-position locking (piston rod advanced) 4 Illustrated: DSBC-32-…-E1 (end-position locking at both ends) 2.2 Type code The precise features of an ISO cylinder can be determined with the help of the product labelling on the cylinder. The order code is positioned directly beneath the Festo logo and describes the ISO cylinder's features separated by a hyphen “-”. Example:
1 Order code 2 Serial number 1 4 2 3 DSBC-32-100-PPV-A-N3-T1 3 Technical information 1463250 C608 4 Part number pmax. 12 bar The order code on the product labelling provides the following information: DSBC ISO cylinder of the type DSBC 32 Size: Piston diameter 32 mm 100 Stroke 100 mm PPV Adjustable end-position cushioning A Position sensing option (for proximity switch) N3 Conforms to ISO 15552 T1 Heat-resistant seals 0 up to + 120 °C ( Chapter 2.3 on page 11 ) A list and description of all possible equipment features of the ISO cylinder can be found on the data sheet. The data sheet is available on the Festo website ( www.festo.com ). 10 / 56 Festo 7DSBCb_en