1 Important information 1.1 About these repair instructions This document contains important information about professional repair of the ISO cylinder of the type DSBC. The ISO cylinder DSBC is fully repairable in the event of damage due to normal wear. The entire ISO cylinder must be replaced in the event of damage to the cylinder barrel. However, the costs of carrying out a repair must be considered in the case of larger defects. Before carrying out a repair, the relevant chapter in these instructions must be read in full and followed consistently. For reasons of clarity, these repair instructions do not contain all detailed information.
The following documents should therefore also be available while performing repair work on the ISO cylinder: Operating instructions Contains information about the operating elements and connections of the ISO cylinder, as well as information about its function, structure, application, installation, commissioning, maintenance and care, etc. This information is available on the Festo website ( www.festo.com ). Spare parts documentation Contains an overview of the spare and wearing parts as well as information on their installation. This can be found in the online spare parts catalogue on the Festo website ( www.festo.com/spareparts ).
“Tools and repair accessories” information brochure Contains an overview of the available installation resources, e.g. lubricating greases, threadlocking agents, maintenance tools, etc. (resources for installation and maintenance). The brochure can be found in the online spare parts catalogue on the Festo website ( Tools and repair accessories.pdf ). 1.2 Symbols used in these repair instructions Danger categories The following symbols identify text passages which draw attention to specific hazards. Warning Caution Marking special information The following pictograms mark passages in the text which contain special information. Note Information Environment 6 / 56 Festo 7DSBCb_en