1.5 Technical requirements Note The following instructions for safe and proper use must be observed: Observe the connection and ambient conditions specified in the technical data of the products and all the connected components. The product can only be operated in compliance with the relevant safety guidelines if you comply with the limit values and load limits ( see enclosed documentation). The ISO cylinder must be in faultless technical condition. The ISO cylinder may only be operated in its original condition and without unauthorised modifications. The ISO cylinder is designed for industrial use.
1.6 Standards and test values Standards and test values which products comply with and fulfil can be found in the "Technical data" sections of the enclosed documentation. 2 General product description 2.1 Functional description The piston moves in the cylinder barrel when the cylinder chamber is pressurised. The piston rod transfers the movement to the outside. The advanced piston rod is retracted again when the other cylinder chamber is pressurised. 8 / 56 Festo 7DSBCb_en