Downloaded from https://www.everyspec.com FM 34-54 field and transfer the sample to an MI unit for transfer to CONUS. The sample must be marked with a sample identification number and documented with the DA Form 1971-6-R and DD Form 1911. Protective equipment and clothing from casualties can be an important source of a CB agent for identification purposes. To do this, place the equipment or clothing in a large mylar bag, fold, expel excess air from the bag, and seal it. Mark the bag with a sample identification number. Place the bag in a second mylar bag, seal, and mark with a sample identification number. Then complete and attach the DA Form 1971-6-R.
Finally, forward the sample to Technical Intelligence for transfer to Corps G2. Document the transfer on DA Form 3147. BIOMEDICAL SAMPLES: Responsible personnel for collecting samples are located in— Battalion-level medical units. Division-level medical treatment facilities. Combat support hospitals. Evacuation hospitals. TECHINT collection teams. In the theater of operations, the TECHINT teams will have the capability to obtain biomedical samples from patients and cadavers. The best biomedical sample is an acutely ill soldier sent back to CONUS immediately. DA Form 1971-6-R is to be completed on all biomedical samples.
In addition, a copy of the physical examination or an extract of significant findings are to be enclosed with the biomedical samples. Additionally, the following samples should be collected whenever casualties occur and should be collected in triplicate, distributing two within CONUS and one to the TAML. Once collected, the samples should be refrigerated or chilled immediately. DO NOT FREEZE. DA Form 1971-6-R will be completed on all biomedical samples. Medical personnel should perform biomedical sample collection to obtain a valid sample. Use the following guidance to collect samples: Collect samples from patients during acute phase and at day 7. H-9