Downloaded from https://www.everyspec.com FM 34-54 thoroughly. They will be especially interested in any modifications done to the equipment. TECHINT teams may also be tasked to supervise the materiel handling and evacuation onsite. The Corps TECHINT LNE or theater TECHINT elements will coordinate with appropriate staffs to evaluate the need to use TECHINT personnel to— Supervise the evacuation. Arrange necessary technical escorts to the Corps CMEC (Forward), CMEC, or CONUS. TECHINT elements are capable of coordinating the handling and shipping with necessary medical, intelligence, NBC, and strategic level elements for captured CB materiel.
Labeling CEM properly is vital to the timely exploitation of the item. It speeds up the often slow process of producing effective countermeasures for the soldier in combat. Proper labeling provides the analyst information necessary for the item's timely exploitation. It also allows interrogators and TECHINT elements to match up knowledgeable prisoners with the CEM from which they became separated in the evacuation process. RESPONSIBILITIES: The capturing unit is responsible for properly marking and tagging CEM. The responsibilities must be clearly established by command SOP. The equipment and document tags accompany the materiel to its final destination.
Article 103 of the Uniform Code of Military Justice is printed on the reverse side of the tag to prevent indiscriminate tampering. As part of core training, all personnel should be instructed on how to tag CEM. They should know the consequences when personnel and equipment are not properly tagged. Training should stress protecting and preserving the original markings on materiel at the time of capture. Weather-resistant capture tags are used. They are normally produced within the theater. They are securely attached to the item itself and to the shipping container.
If weather-resistant tags are not available, use any material (for example, rations packing) on which pertinent capture data can be recorded. There are two procedures for marking and tagging CEM. The procedure used depends on whether or not the captured item is associated with a C-9 MARKING AND TAGGING