3. Instructions for safe operation 3.2.2 Seat belt : Rear seat belt indicator lamp* Seat belt indicator lamp CAUTION If rear seat belt indicator lamp is on in white, it indicates that the seat belt is fastened, and if the indicator lamp is on in red, it indicates that the seat belt is not fastened or the SRS is faulty. If the indicator lamp stays red after the seat belt is fastened correctly, it means that the SRS is failed. In that case, please go to the GAC Motor authorized shop for inspection in time. :
Driver’s seat belt indicator lamp ● Before driving, please check whether there are any heavy objects on the front passenger’s seat to avoid the system mistakenly determining that the seat is occupied and issuing a false alarm. : Front passenger’s seat belt indicator lamp The following alarms will be triggered when the vehicle power switch is set to “ON” position: - If the driver or front passenger does not fasten the seat belt at a speed lower than 20km/h, the corresponding indicator lamp in the instrument cluster will flash for about 6s and stay on, accompanied by an alarm message.
- If the driver or front passenger does not fasten the seat belt at a speed higher than or equal to 20km/h, the corresponding indicator lamp in the instrument cluster will flash for about 20s and stay on, accompanied by an alarm message and a continuous audible alarm. ● If the alarm remains on after the seat belt is fastened correctly, it means that the SRS is failed. In that case, please go to the GAC Motor authorized shop for inspection in time. The rear seat belt indicator lamp is on for 35 s and then goes out in normal cases, and it will light up under the following conditions: WARNING - The rear passenger does not fasten the seat belt when the engine starts.
- The rear passenger does not fasten the seat belt when the rear door is opened/ closed. Never insert the substitute of seat belt tongue into the buckle to eliminate the seat belt alarm. - The rear passenger fastens or unfastens the seat belt. 15