LTE Standard Module Series String type. Name of local media file, includes file path, file name and file suffix. File path must be UFS: . Integer type. Play the file once or repeatedly. 0 Play only once 1 Play repeatedly Error codes. For more details, see Chapter 3 . NOTE 2.3.6. AT+QAUDMOD Set Audio Mode This command sets the audio mode required for the connected device. Parameter Integer type. The current audio mode.
0 Echo canceller, noise suppressor, digital gain and calibration parameter for handset 1 Echo canceller, noise suppressor, digital gain and calibration parameter for headset 2 Echo canceller, noise suppressor, digital gain and calibration parameter for speaker EC200U&EG915U_Series_Audio_Application_Note 14 / 25 1. If there is an unknown error occurred, the module reports URC +QAUDPIND: 0,1. 2. If current playing is interrupted by other audio tasks, the module reports URC +QAUDPIND: 0,6. AT+QAUDMOD Set Audio Mode Test Command AT+QAUDMOD=? Response +QAUDMOD: (range of supported s) OK Read command AT+QAUDMOD? Response +QAUDMOD:
OK Write Command AT+QAUDMOD= Response OK Or ERROR If there is any error related to ME functionality: +CME ERROR: Maximum Response Time 300 ms Characteristics The command takes effect on next sound action. The configuration will not be saved.