GENERAL SPECIFICATIONS 1-9 E UROCARGO Euro 4/5 Dimensions and weights 1.13 Dimensions and weights 1.13.1 General specifications The dimensions and maximum permissible weight on the axles are indicated on drawings, on technical specifications and, in greater details, on the official documentation issued by IVECO. The kerb weights refer to vehicles with standard equipment. Special equipment may involve considerable modification to the weight and its distribution on the axles. Lights and rear-view mirrors positioning on our vehicles is designed for widths of 2,550 mm. This dimension may also be applied to special body versions with a width of 2,600 mm (e.g. refrigerator vans).
Weighing the chassis As a result of production factors there may be a variation in weight of approx. 5%. It is, therefore, advisable to determine the weight of the vehicle with its cab before fitting the body and equipment and establishing their distribution on the axles. 1.13.2 Determining the centre of gravity of the body and payload Positioning on longitudinal plane To establish the location of the centre of gravity of the body and payload the following examples below may be used as guidelines. The technical documentation specific to each model (chassis cab drawing) give the positions permitted with the vehicle in itsstandard form.
The weight and positioning of the single components of the vehicle are given in the chassis and weight distribution diagram. Dimensions and weights Print 603.93.431 Base - January 2008