SPECIAL INSTRUCTIONS FOR ELECTRONIC SUBSYSTEMS 5-17 E UROCARGO Euro 4/5 Figure 5.8 116699 The EM control unit enables setting the conditions for switching the PTOs on and off. The connections on ST60, ST61 and ST62 must be made by the bodybuilder so as to activate and view the activation of the PTO on IC. The functions that can be activated via connections ST12 and ST16 are in the phase of definition. NOTE The default conditions set for EuroCargo Euro4-5 are: 5.7.1 Connections Table 5.14 - PTO mode request: ST13 PTO 2 pin 19 To make the request, close the pins on the ground of pin 17. Table 5.15 - PTO IN/OUT:
ST60 PTO1, ST61 PTO2, ST62 PTO3 pin 1 PTO feed-back pin 2 PTO actuator (control for solenoid valve) pin 3 PTO enabling pin 4 Ground EM (Expansion Module) Print 603.93.431 Base - January 2008 PTO 1 pin 18 PTO 3 pin 20