Testing the Printer Paper Path Test You can test printer operation with the Paper Path Test in the Test Menu. It will print 1, 10, 100, or 500 (single or 2-sided) pages from any of the paper trays (or the Envelope Feeder) and deliver them to a previously specified output bin. First, select PAPER DESTINATION and 2-SIDED printing (if a duplexer is installed) in the Configuration Menu (table 3-8) and then run the Paper Path Test from the Information Menu (table 3-4).
Configuration Page When you print a Configuration Page, the printer checks its internal controller and I/O interface, then prints a page showing the overall printer configuration (see figure 7-12 on page 464), and a Menu Map showing the current menu settings (see figure 7-11 on page 462). You can review these printouts to verify proper installation of installed accessories, options, and personalities. 1 Press M ENU until INFORMATION MENU appears. 2 Press I TEM until PRINT CONFIGURATION appears. See “Information Pages” starting on page 461 for sample information pages. 3 Press S ELECT to print the configuration pages. 80 Chapter 3 Operating Overview C4085-91087