Collator Mode G Mopies of a print job are automatically sent one mopy per bin beginning with the top bin. G If there are more mopies than bins, the delivery resumes sequentially from the top bin until all mopies are delivered. G If a bin fills during delivery, the system will stop. A control panel message indicates which bin is full, and will display a request to remove paper. Delivery of the mopy resumes in the same bin when paper is removed. G To clear a device full condition, empty all bins. Note Use of an overflow bin can cause a job to be mixed in two bins.
Finisher Components The 5-bin Mailbox with Stapler is an output-Finisher paper-handling device designed to work with different HP LaserJet printers. It has both mailbox and stapling capability. The stapler unit output bin staples up to 20 sheets (letter and A4, 20-lb paper), and has a total capacity of 350 stapled sheets. In addition, this component has 5 Face-down bins with a capacity of 250 sheets each, and 1 Face-up Bin with a capacity of 100 sheets, for a total capacity of 1350 non-stapled sheets. The 8-bin Mailbox and the 5-bin Mailbox with Stapler have similar functionality, performance, and parts.
The stapler fits into the Mailbox by removing the three upper bins and the blind cover (see figure 8-11 on page 536 for location of the blind cover). C4085-91087 Paper Paths and Components 137